How To Put A Car In Neutral Without Keys

What Happens If You Put A Car In Park While Driving?

Do you know how to put a car in neutral without keys? Of course, I didn't when I first started driving. But after a few close calls, I finally learned the right way to do it.

The Right Tools

The first step to putting a car into neutral without keys is to have the right tools on hand. I always keep a pair of jumper cables and a flat-head screwdriver in the car just in case. Of course, you may also need something to tie off the car so you don't accidentally kick the car into gear. Anything from a stick to a bungee cord will work.

The jumper cables are the most important tool since you will need them to connect the starter to the battery. This bypasses the ignition system and allows you to start the car without the key.

Access the Starter

Next, you will need to access the starter in order to connect the jumper cables. If you are lucky, the starter will be easy to access. You may be able to just reach in and connect the cables without too much trouble.

In some cars, the starter may be more difficult to access. In these cases, you may need to remove a few bolts or unscrew some panels in order to get to it. Be sure to take your time and work cautiously to avoid damaging any parts.

Connect the Jumper Cables

Once you have accessed the starter, you can connect the jumper cables. First, connect the red cable to the positive post on the battery. Then, attach the black cable to the negative post.

Finally, attach the other end of the red cable to the starter and the other end of the black cable to a ground point. This completes the connection and you should be able to start the car without the key.

Put it in Neutral

Now that the car is running, you can put it in neutral without the key. First, find the gearshift. This is usually located on the floor, near the brakes, or on the steering column. Once you find it, gently slide it into the neutral position.

You may need to press the clutch pedal in order to shift the car into neutral. This is because some cars require the clutch to be disengaged before the gearshift can move out of gear. Be careful not to press too hard as it can damage the clutch.

Test it Out

Finally, you can test your work by revving the engine slightly and checking for any issues. Make sure the car is not rolling or shaking in neutral. If everything looks good, you are ready to go!

Conclusion

Putting a car in neutral without keys sounds difficult, but it doesn't have to be. With the right tools and a bit of patience, you can get your car into neutral without any issues. Just remember to be safe and take your time. Good luck!